HP33 series high frequency ups 3-phase ups
--Advanced DSP digital control technique
ShangYu HP33 series adopts advanced DSP digital control technique,
while promoting the performance of the product at the same time, it
greatly satisfy the user’s demand to power supply products’
practicality, environment is relatively poor, it can ensure stable
run ability continuously.
--N+X parallel redundancy(support parallel machine sharing battery)
HP33 series of 20-100 k product can support 6-8 set of UPS parallel
machine which is suitable for using in the N + X redundant
applications. In the redundant work condition,the system can share
a set of batteries saving the investment cost of users.
--Reliability, Flexibility, Economy
In order to improve the precision, accuracy and stability of the
HP33 series 20-100 kva system control, in the control system, using
DSP and CPU, DSP with the ability of the highly effective
operation, after signal processing,
high efficiency, reliability and safety. Although electricity
providing CPU as system control. Powerful operation makes the
system control ability faster and more accurate, which is
beneficial to enhance the system's reliable digital control system,
simplify the peripheral control circuit, reduce the use of
traditional analog components, avoid analog components of zero
drift problem happens after running for a long time.It enhance the
stability of the system control, especially benefit to reliable
operation of the parallel machine system.
--Clear and simple operation of the LCD panel in both Chinese and
English
HP33 series 20-100kva adopts large screen LCD graphical display
panel in both Chinese and English, which convenient to operate for
users.
--Excellent industrial environmental protection performance
Under standard configuration it can meet IP21 protection grade.But
in order to achieve higher dustproof requirements, the user can
choose dust components to improve dustproof level under industrial
environment,ensuring the UPS equipment can operate safely under the
harsh environment.
Providing a wide range of input voltage 210 vac - 210 vac can apply
to bad power grid environment, excellent input frequency range make
UPS can adapt different power supply devices, such as generator.
--Intelligent charging management
Advanced intelligent charging ways through the control of
CPU,According to the different environmental conditions, UPS
charger can fixed charge parameters and provide a optimized way to
battery charge.
--Efficient and energy saving
The machine efficiency is as high as 93%;Under the ECO mode,the
machine efficiency is as high as 98% which reduces the UPS power
loss.
Intelligent high-frequency rectifier inverter technology,the input
power factor is as high as 0.99, input current harmonic is less
than 3%.
--Positive operations and maintenance functions
Give full consideration to the effective utilization of user
space;Modular design and the positive maintenance, greatly shorten
the troubleshooting time of the machine, improve the availability
of the UPS system.
HP33 series of 20-100 kva UPS has compact structure which meet the
requirements of users, and it adopts the built-in battery design
which can achieve positive maintenance replacement battery, at the
same time ,it cover an area of an area small and saves valuable
space.
--Abundant monitoring and communication interface
HP33 series of 10-120kva UPS provides Intelligent Slot,expansion
Slot, the PARALLEL, EXT.BATTERY TEMP PROBE,AS400,EPO,RS485,RS232
and SERVICE monitoring communication interface which is our company
or our company authorized technical personnel dedicated.
--Overload capacity
110%< load ≤125% , greater than or equal to 10 minutes transfer
to the bypass.
125%< load ≤150% , greater than or equal to 1 minutes transfer
to the bypass.
Technical Parameters:
| Model | GPi33160K | GPi33200K | GPi33250K | GPi33300K | GPi33400K | GPi33500K | GPi33600K | GPi33800K |
| Capacity | 160KVA | 200KVA | 250KVA | 300KVA | 400KVA | 500KVA | 600KVA | 800KVA |
| Power | 144KW | 180KW | 225KW | 270KW | 360KW | 450KW | 540KW | 720KW |
| Physical parameters |
| Net | Width(mm) | 1000 | 1500 | 2100 | 3200 |
| Depth x Height(mm) | 850 x 1900 | 1000 x 1900 | 1000 x 1900 |
| Single Weight(kg) | 800 | 910 | 1000 | 1400 | 1700 | 2100 | 2400 | 3950 |
| Input Characteristics |
| Connections Type | Hard Wire 4-wire (3Ph + G) |
| Voltages | 380 - 400 - 415 Vac three-phase |
| Range | 304~456V |
| Frequency | 45 - 65 Hz |
| Power Factor(at linear load) | > 0,99 | > 0,99 | > 0,99 | > 0,99 | > 0,99 | > 0,99 | > 0,99 | > 0,99 |
| Total harmonic(THDI)(at linear load) | ＜3% |
| Output Characteristics (inverter) |
| Connections Type | Hard Wire 5-wire (3Ph+N+G) |
| Waveform | Sinewave |
| Output Voltage Rated | 380 - 400 - 415 Vac three-phase + N (selectable) |
| Output Voltage | Steady state | ± 1% |
| stability | Transient state | ± 5% |
| Frequency | 50 or 60 Hz (selectable) |
| Frequency stability | ± 0.05% |
| Frequency Synchronisation Range | ± 5Hz(Equal to bypass working range) |
| Frequency Synchronisation Speed | (1~2)Hz/s |
| Power factor | 0.9 |
| Load Crest Factor | 3:1 |
| Total | linear load | < 1% |
| harmonic(THDV) | nonlinear load | ≤3% |
| Dynamic in-rush voltage range | 0%->100%->0% load:≤1% |
| Dynamic recovery time (III Grade) | 0%~100%RCD load:<20 ms recover to 90% of nominal voltage |
| Phase Displacement | 120º ±1° |
| Transfer time | 0ms |
| Overload Operation | 110% for 60minutes |
| 125% for 10minutes |
| 150% for 1minute |
| 200% for 7seconds |
| Short-circuit capability | 180% for second |
| Transient response time | |
| Rectifier/Charger/Batteries and energy storage |
| Rectifier | Rectifier Type | IGBT |
| Rated output voltage | DC 480V |
| Charger voltage | Adjustable range of DC 524V ~ 576V | Adjustable range of DC 542V ~ 576V |
| Charging current(max) | 32A | 40A | 50A | 50A | 70A | 70A | 70A | 135 |
| Battery | Support VRLA Battery | Yes |
| Battery voltage window | 40 Blocks (setting range 40 ~ 43) |
| Reverse diode | No |
| Cold start | Yes |
| Bypass Characteristics |
| Connections Type | Hard Wire 5-wire (3Ph+N+G) |
| Input voltage range | 220V ±15%(setting range ±10% ~ ±25%) |
| Overload/Short-circuit capability | 110% for 60 minutes,125% for 10 minutes,150%per 1 minute |
| 1second(Rated *7 ),500 ms(Rated *8 ) ,200 ms(Rated *9 ) ,100 ms
(Rated *10 ),100 ms (Rated *14 ) |
| System |
| Efficiency(at linear load) | 93.50% | 93.50% | 93.50% | 93% | 93% | 93% | 93% | 94.5% |
| ECO mode (Non-parallel models) | Yes |
| EPO function | Yes |
| Over Temperature Protection | Rectifier/Charger/Inverter(90℃) |
| Standard | IEC 60529 |
| IEC 60664 |
| IEC 60755 |
| Clearance/Installation back side | 60 cm - Back to back |
| 0 cm side to side |
| Applications | Data Centers ,Telecommunications, Industrial processes ,
electro-medical systems |
| Interface, Monitoring, Communication, Option |
| Display Language | English |
| Remote communication slot | 1 slots for communication cards to accommodate SNMP card |
| Remote communication cards(STANDARD) | Modbus RS-232 / RS-485 |
| Remote communication cards(OPTION) | SNMP |
| Dry contacts terminal blocks | 3 outputs 2inputs |
| IP level | IP20(default) |
| Environment |
| Acoustic noise at 1M | 65~ 70 dBA at full load | 72 dBA at full load |
| Ambient operating temperature | 0~35degree continuous |
| 40° full load 8 hours nominal input voltage, recharging batteries,
no overload. |
| Working at 45°C derating to 85%, with linear load |
| Ambient storage temperature | -25℃~55℃ |
| Humidity | 0 to 90% without condensing |
| Altitudes(Output power derating) | 1000M:1 |
| 1500M:0.975 |
| 2000M:0.95 |
| 3000M:0.9 |
| 4000M:0.85 |
High Frequency Online Ups
Technical Specifications:
1.True Online UPS with Triple Conversion
2.Wide Input Voltage Range
3.Built-in OVCD for High Voltage Protection
4.Active Input Power Factor Corrector
5.Selectable Output Voltage
6. output power factor 0.8
7.Built-in and External Battery Options
8.Advanced battery management (ABM)
9.Smart Battery Charger Design
10.Comprehensive Display for easy monitoring and access of UPS
Status
11.Generator Compatible
12.Cold start feature (DC power on)
13.RS232/USB/SNMP (LAN) for UPS monitoring
14.ECO mode operation for energy saving
15.Self-diagnosis at UPS start ups
Applications
-Graphic Workstations
-Network servers
-Data Processing centers
-Data warehouses
-BPOs
-Telecommunication
-Networking Equipment.
-Mini and Micro Computers
-Medical equipment
